Grease Trap Pumping Service San Diego
Grease Trap Pumping Service San Diego – Cleaning And Maintaining The Functionality Of Grease Traps.
Wastewater that comes out of any establishment be it a house, a restaurant, a hotel, school, etc., consists of several different particulate matters.
Some of these are miscible, some immiscible. This immiscible matter generally consists of grease, fats, oils, etc., which, if allowed to get into the water disposal system, might give rise to clogging or blocked drains or even a sluggish flow.
Hence to ensure that these particles are not able to enter the system, traps are used. Such traps are called grease traps.
How do grease traps operate
Grease traps are part of the plumbing system too, but they are generally installed outside the house or the establishment. These traps help to capture grease and other oily particles, preventing their entry into the waste disposal system.
When grease and other oily particles enter into the system, they are broken down very slowly by anaerobic micro-organisms present in the septic tanks. This slow breakdown process leaves behind a foamy scum layer, this foam, when left for a long time, will eventually clog up the whole septic tank system.
When installing a grease trap, the grease trap position must be correct, for passage of grease-free water into the septic disposal system but traps anything which even remotely resembles grease or oils.
A grease trap is not a food disposal unit. Large and small food particles need to be cleaned away and put into the garbage disposal unit. Scientifically, food, if allowed to remain in the grease trap, tends to rot and break down, thereby releasing toxic and potentially harmful gasses like hydrogen sulfide.
This gas further combines with water to form a mild sulphuric acid, which is well known for its corrosive action on concrete, steel, etc., thereby damaging the trap itself.
Why is it necessary to clean a grease trap
The grease that gets collected in the trap is in a contaminated form and cannot be used. It, thus, needs to be pumped out to keep the trap free and clean for it to function well.
Grease trap cleaning
The cleaning of the grease traps can be facilitated with the help of a grease trap pump out. This involves getting in touch with professionals specializing in this and have the necessary equipment like a truck equipped with a liquid holding tank, hoses, etc.
DiamondSeptic.com – 1-866-592-2115
On reaching the grease trap to be cleaned, the tube is put inside the grease trap, and the accumulated grease is sucked out into the holding tank on the truck.
This function is generally carried out when the grease trap starts to stink or grease blockages result in the clogging of the traps.
A comprehensive step by step procedure involves a lot of other things, too, in addition to the complete removal of evacuation or removal of the contents of the grease trap.
They are scraping and washing the baffles and walls, inspection of the inlet and outlet points to check for any grease accumulation, lid replacement after deodorization, testing and reporting for any abnormalities in the condition of the trap, conducting trap audits so that the service quality can be maintained.
A comprehensive report of waste tracking right from its source to its disposal transportation of the waste or grease collected to a suitable treatment facility and keeping a check on operational and safety hazards.
Care should be taken; it is best to hire a professional company to do the grease trap pump outs so that the job is done correctly.
DiamondSeptic.com – 1-866-592-2115